3 Course Bundle
NEC 2020 and 2023 Requirements for PV Systems (Parts 1-3)
This is a bundle of these 3 courses
About this course
This comprehensive 9-hour course, led by Mayfield Renewables Founder and CEO Ryan Mayfield, covers the sections of the 2023 National Electrical Code (NEC) that are most relevant to solar PV systems.
Students can expect to learn about sections of the codebook that pertain to solar PV, including Articles 90, 100, 110, 690, 691, 705, 450, and 750, covering:
Students can expect to learn about sections of the codebook that pertain to solar PV, including Articles 90, 100, 110, 690, 691, 705, 450, and 750, covering:
- Rapid shutdown
- Disconnecting means
- Wiring methods and materials
- Grounding and bonding
- Source connections
- Requirements for large-scale PV systems
- Source connections to a service
- Load-side source connections
- PV and transformer overcurrent protection
- Microgrids and energy management systems
- And more!
This is an adaptation of Ryan's full-day code course that he teaches at conferences like the NABCEP Continuing Education Conference.
All course registrants will get access to all course materials — including videos, diagrams, and the course PDF.
Registrants can also receive 9 hours of NABCEP CEUs upon completing all three parts in the series.
Subjects covered
Solar
Design and Installation
Bundle outline
3 courses
9 hours to complete
Course 1 •
1
modules
NEC 2020 and 2023 Requirements for PV Systems Part 1
Course 1 •
1
modules
NEC 2020 and 2023 Requirements for PV Systems Part 1
Welcome • 2 assignments
Orientation Materials
Welcome • 2 assignments
Orientation Materials
This course is self-paced, so you don’t need to be logged in at any specific time. You can get started immediately after you enroll and the course materials will remain in your account with minimum guaranteed access for 12 months (1 year) after enrollment.
- Set up email notifications and your student profile
- Introduce yourself on the discussion board
Module 1 • 15 assignments
NEC 2020 and 2023 Requirements for PV Systems Part 1
Module 1 • 15 assignments
NEC 2020 and 2023 Requirements for PV Systems Part 1
- Presentation Materials (.pdf)
- Lesson 1: Course Introduction and Article 90 (20:28 minutes)
- Lesson 1 Quiz
- Lesson 2: Article 100 and Article 110 (25:05 minutes)
- Lesson 2 Quiz
- Lesson 3: Article 690 Part I (17:02 minutes)
- Lesson 3 Quiz
- Lesson 4: Section 690.7 Maximum Voltage (20:20 minutes)
- Lesson 4 Quiz
- Lesson 5: Section 690.8 Circuit Sizing and Current (23:31 minutes)
- Lesson 5 Quiz
- Lesson 6: Section 690.8 Circuit Sizing and Current (Continued) (29:27 minutes)
- Lesson 6 Quiz
- Lesson 7: Section 690.9 Overcurrent Protection and Course Conclusion (28:17 minutes)
- Lesson 7 Quiz
Conclusion • 4 assignments
Feedback and Additional Resources
Conclusion • 4 assignments
Feedback and Additional Resources
This is our last module but you still have access to the all of course materials for 12 months (1 year), so keep working and you'll be able to complete the course at your own pace. After your year of access expires you can optionally extend access with a HeatSpring Membership. Enjoy the course and keep in touch!
- 1 Year of Access to Course Materials
- Feedback: 2-minute Exit Survey
- Consider Joining as a HeatSpring Member
- Certificate of Completion: Request a Certificate
Course 2 •
1
modules
NEC 2020 and 2023 Requirements for PV Systems Part 2
Course 2 •
1
modules
NEC 2020 and 2023 Requirements for PV Systems Part 2
Welcome • 2 assignments
Orientation Materials
Welcome • 2 assignments
Orientation Materials
This course is self-paced, so you don’t need to be logged in at any specific time. You can get started immediately after you enroll and the course materials will remain in your account with minimum guaranteed access for 12 months (1 year) after enrollment.
- Set up email notifications and your student profile
- Introduce yourself on the discussion board
Module 1 • 13 assignments
NEC 2020 and 2023 Requirements for PV Systems Part 2
Module 1 • 13 assignments
NEC 2020 and 2023 Requirements for PV Systems Part 2
- Presentation Materials (.pdf)
- Lesson 1: Course Introduction and Article 690 Part II (26:22 minutes)
- Lesson 1 Quiz
- Lesson 2: Article 690 Part III Disconnecting Means (29:27 minutes)
- Lesson 2 Quiz
- Lesson 3: Article 690 Part IV Wiring Methods and Materials (29:17 minutes)
- Lesson 3 Quiz
- Lesson 4: Article 690 Part IV Wiring Methods and Materials (Continued) (24:19 minutes)
- Lesson 4 Quiz
- Lesson 5: Article 690 Part V Grounding and Bonding (29:29 minutes)
- Lesson 5 Quiz
- Lesson 6: Article 690 Part V Grounding and Bonding (Continued) (21:26 minutes)
- Lesson 6 Quiz
Conclusion • 4 assignments
Feedback and Additional Resources
Conclusion • 4 assignments
Feedback and Additional Resources
This is our last module but you still have access to the all of course materials for 12 months (1 year), so keep working and you'll be able to complete the course at your own pace. After your year of access expires you can optionally extend access with a HeatSpring Membership. Enjoy the course and keep in touch!
- 1 Year of Access to Course Materials
- Feedback: 2-minute Exit Survey
- Consider Joining as a HeatSpring Member
- Certificate of Completion: Request a Certificate
Course 3 •
1
modules
NEC 2020 and 2023 Requirements for PV Systems Part 3
Course 3 •
1
modules
NEC 2020 and 2023 Requirements for PV Systems Part 3
Welcome • 2 assignments
Orientation Materials
Welcome • 2 assignments
Orientation Materials
This course is self-paced, so you don’t need to be logged in at any specific time. You can get started immediately after you enroll and the course materials will remain in your account with minimum guaranteed access for 12 months (1 year) after enrollment.
- Set up email notifications and your student profile
- Introduce yourself on the discussion board
Module 1 • 15 assignments
NEC 2020 and 2023 Requirements for PV Systems Part 3
Module 1 • 15 assignments
NEC 2020 and 2023 Requirements for PV Systems Part 3
- Presentation Materials (.pdf)
- Lesson 1: Course Introduction and Article 691 (19:53 minutes)
- Lesson 1 Quiz
- Lesson 2: Introduction to Article 705 (30:26 minutes)
- Lesson 2 Quiz
- Lesson 3: 705.11 Source Connections to a Service (29:36 minutes)
- Lesson 3 Quiz
- Lesson 4: 705.12 Load-Side Source Connections (28:55 minutes)
- Lesson 4 Quiz
- Lesson 5: 705.13 through 705.40 (29:55 minutes)
- Lesson 5 Quiz
- Lesson 6: Article 450 and 240.21 Location in Circuit (28:49 minutes)
- Lesson 6 Quiz
- Lesson 7: Articles 705 (Continued) and 750 (19:24 minutes)
- Lesson 7 Quiz
Conclusion • 4 assignments
Feedback and Additional Resources
Conclusion • 4 assignments
Feedback and Additional Resources
This is our last module but you still have access to the all of course materials for 12 months (1 year), so keep working and you'll be able to complete the course at your own pace. After your year of access expires you can optionally extend access with a HeatSpring Membership. Enjoy the course and keep in touch!
- 1 Year of Access to Course Materials
- Feedback: 2-minute Exit Survey
- Consider Joining as a HeatSpring Member
- Certificate of Completion: Request a Certificate
Continuing Education Units
Approved NABCEP CEU Hours
| NABCEP Credential | Advanced Hours for Exam | Recertification CEU Hours | NEC | JTA | RE Elective | Building or Fire Code |
|---|---|---|---|---|---|---|
| 9 | 9 | 9 | 9 | 9 | 0 | |
| 0 | 9 | 0 | 0 | 0 | 0 | |
| 0 | 9 | 9 | 0 | 9 | 0 | |
| 9 | 9 | 9 | 0 | 9 | 0 | |
| 9 | 9 | 9 | 0 | 9 | 0 | |
| 0 | 9 | 0 | 0 | 9 | 0 | |
| 9 | 9 | 9 | 0 | 9 | 0 | |
| 0 | 9 | 9 | 0 | 0 | 0 |
Instructors
Ryan Mayfield
Founder & CEO, Mayfield Renewables
Ryan Mayfield has been working in the renewable energy field since 1999 and is the President of Mayfield Renewables (formerly Renewable Energy Associates), a consulting firm providing design, support and educational services for electrical contractors, architectural and engineering firms, manufacturers and government agencies. Ryan served as Photovoltaic Systems...
An engineer, an educator, and a technical committee member who reviews proposed changes to the National Electrical Code®, Ryan Mayfield has been committed to raising the bar on renewable energy industry best practices since 1999. “We know that the more expertise you have, the more you can drive down risk,” Ryan says. “That’s why we built Mayfield Renewables with...
Frequently asked questions
Full FAQHow does this course work?
You can begin this online course instantly upon enrollment. This 1 module course is delivered entirely online. This course is self-paced and you can set your own schedule to complete the materials. You can begin the lecture videos and other course materials as soon as you enroll. During your year of access the instructor will be in the course answering questions on the discussion board every Friday. After successfully completing the course, you will be able to generate a certificate of completion.
How long do I have access to the materials?
Students get unlimited access to the course materials as soon as they enroll and for one year (365 days) after enrollment. Rewatch videos and review assignments as many times as you want. View updates the instructor makes to the course as the industry advances. Return to your course anytime with online access from anywhere in the world. After the one year of access expires, access can be extended by joining as a HeatSpring member. A single membership extends access to course materials for all past enrollments.
Is there a certificate of completion?
Yes, when you complete this course you are eligible for a certificate of completion from HeatSpring. You can download your certificate as soon as you have completed all of the course requirements. Students can easily share their verified certificates on their LinkedIn profiles using our LinkedIn integration.
Can I register multiple people?
Yes please visit our [HeatSpring for Teams](/for_teams) page to get a group discount.